Please use this identifier to cite or link to this item: http://hdl.handle.net/11612/3175
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorMarchesan, Raquel-
dc.contributor.authorMeireles, Fernanda Kuffel-
dc.date.accessioned2021-10-06T14:08:44Z-
dc.date.available2021-10-06T14:08:44Z-
dc.date.issued2021-10-06-
dc.identifier.citationMEIRELES, Fernanda Kuffel. Caracterização de painéis compostos por Cimento Portland e Lignina. 2021. 30 f. TCC (Graduação) - Curso de Engenharia Florestal, Universidade Federal do Tocantins, Gurupi, 2019.pt_BR
dc.identifier.urihttp://hdl.handle.net/11612/3175-
dc.description.abstractThe objective of the present work was the production, evaluation and physical and mechanical characterization of panels composed of cement and lignin in order to compare them with panels commonly produced aiming at the possibility of their production on a commercial scale and with this the reutilization of residues produced in large amounts. The lignin was made available by the Suzano Pulp and Paper industry, located in Limeira in the state of São Paulo and the pinus collected in local industries, municipality of Gurupi-TO. Apparent density (g/cm³), axial compressive strength (MPa) and absorption (%) were evaluated for the characterization of the panels. For the preparation of the specimens Portland cement type II (CP II), water, pine and lignin particles and a synthetic additive were used. The pine was subjected to the particle milling and drying process at 8.0% moisture and the lignin was used in the form of particles with 4.6% moisture. After the cement mortar was ready, it was placed in molds made according to NBR 5738 (2003) and D-1037 (1999), and subjected to mechanical vibration compaction. Four treatments were used to make the panels: T1- Cement and Pinus; T2- Cement, Pinus and Lignin; T3- Cement and Lignin and T4 Cement and sand (control). With data generated, the same were submitted to the Bartlett programs to analyze the normality of the variances, Shapiro-Wilk test to test the data normality, Box Cox for data that did not present normality and for statistical analyzes and interaction of the factors used o Sisvar 5.6pt_BR
dc.language.isopt_BRpt_BR
dc.publisherUniversidade Federal do Tocantinspt_BR
dc.rightsAcesso Livrept_BR
dc.subjectCaracterizaçãopt_BR
dc.subjectPinuspt_BR
dc.subjectPainel cimento-madeirapt_BR
dc.subjectDescriptionpt_BR
dc.subjectPinuspt_BR
dc.subjectCement-wood panelpt_BR
dc.titleCaracterização de painéis compostos por Cimento Portland e Ligninapt_BR
dc.typeMonografiapt_BR
dc.description.resumoO presente trabalho teve por objetivo a produção e caracterização física e mecânica dos painéis compostos por cimento e lignina a fim de compará-los com painéis comumente produzidos visando a possibilidade de sua produção em escala comercial e com isso o reaproveitamento de resíduos produzidos em grandes quantidades. A lignina foi disponibilizada pela indústria Suzano Papel e Celulose, localizada em Limeira no estado de São Paulo e o pinus coletado em indústrias locais, do município de Gurupi-TO. Para a caracterização dos painéis foram avaliados densidade aparente (g/cm³), resistência à compressão axial (MPa) e absorção (%). Para a confecção dos corpos de prova foram utilizados o cimento Portland do tipo II (CP II), água, partículas de pinus e lignina e um aditivo sintético. O pinus foi submetido ao processo de moagem e secagem das partículas a 8,0% de umidade e a lignina foi utilizada na forma de partículas com 4,6% de umidade. Após pronta a argamassa de cimento foi colocada em moldes confeccionados conforme a NBR 5738 (2003) e D-1037 (1999) adaptadas, e submetida a compactação vibro mecânica. Foram determinados quatro tratamentos para confecção dos painéis: T1- Cimento e Pinus; T2- Cimento, Pinus e Lignina; T3- Cimento e Lignina e T4 Cimento e areia (testemunha). Com dados gerados submeteu-se os mesmos aos programas Bartlett para analisar a normalidade das variâncias, teste de Shapiro-Wilk para testar a normalidade dos dados, Box Cox para os dados que não apresentaram normalidade e para analises estatísticas e interação dos fatores utilizou-se o Sisvar 5.6.pt_BR
dc.publisher.campusGurupipt_BR
dc.subject.cnpqCNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTALpt_BR
dc.publisher.cursoCURSO::GURUPI::PRESENCIAL::BACHARELADO::ENGENHARIA FLORESTALpt_BR
dc.publisher.localGurupipt_BR
dc.publisher.levelGraduaçãopt_BR
Appears in Collections:Engenharia Florestal

Files in This Item:
File Description SizeFormat 
Fernanda Kuffel Meireles..pdf1.35 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.